Mesh and rebar are bought by the sheet, the length and the ton, so the useful numbers are how many sheets fit once they overlap, and how many kilograms a bar grid weighs. The calculators below use standard South African sheet sizes and the steel mass formula every steel merchant uses.
Mesh references and weights
South African welded mesh is named by its reference number, which is the cross-section of steel in square millimetres per metre of width (SANS 1024). The mass follows directly: about the reference number × 0.0157 kg per square metre.
| Mesh | kg/m² | kg per 6 × 2.4 m sheet | Often used for |
|---|---|---|---|
| Ref 100 | 1.57 | 22.6 | Rib-and-block toppings, light paths |
| Ref 193 | 3.03 | 43.6 | House floors, driveways, garage slabs |
| Ref 245 | 3.85 | 55.4 | Heavier driveways, workshop floors |
| Ref 311 | 4.88 | 70.3 | Industrial floors, as designed |
| Ref 395 | 6.20 | 89.3 | Heavily loaded slabs, as designed |
| Ref 617 | 9.69 | 139.5 | Engineer-designed structural slabs |
Rebar mass per metre
The mass of a steel bar is its diameter squared divided by 162, in kilograms per metre. High-tensile bars are marked Y (or T), mild steel R.
| Bar | kg per metre | kg per 6 m length | Lengths per ton |
|---|---|---|---|
| Y8 | 0.395 | 2.37 | 421 |
| Y10 | 0.617 | 3.70 | 270 |
| Y12 | 0.889 | 5.33 | 187 |
| Y16 | 1.580 | 9.48 | 105 |
| Y20 | 2.469 | 14.81 | 67 |
| Y25 | 3.858 | 23.15 | 43 |
Getting the steel in the right place
- Lift it. Mesh lying on the membrane does nothing. Set it on bar chairs or concrete spacers so it sits in the slab, usually about a third of the way down in a ground slab, with at least 40 mm of cover.
- Lap and tie. Overlap sheets by at least one mesh square plus 50 mm and tie them, so the slab acts as one piece across the joins.
- Keep it clear of the edges. Cover of 40 to 50 mm at the sides and top protects the steel from rust.
- Follow the drawings. For suspended slabs, rafts and beams, the engineer's bending schedule sets every bar.
Read more about reinforcing mesh and rebar, or get prices from steel suppliers with the form below.
Frequently asked questions
How many mesh sheets do I need for a slab?
What does Ref 193 mean?
How do I calculate the weight of rebar?
How much should rebar overlap?
More concrete calculators
- Concrete slab calculatorCubic metres and ready-mix trucks for slabs, paths and driveways, several pours on one docket.m², m³ and 6 m³ trucks
- Cement, sand and stone calculatorHow many bags of cement, and how much sand and 19 mm stone, to mix a slab by hand or in a mixer.bags, m³, tonnes and a batch
- Rib and block calculatorBeams, blocks, topping concrete, mesh and props for a rib-and-block first floor or roof slab.beams, blocks, m³, mesh and props
- Foundation and footing calculatorConcrete and excavation for strip footings and column bases, with the cement bags if you mix on site.m³ concrete, trenches and spoil
- Floor screed calculatorCement and sand for a sand-cement floor screed by area, thickness and mix, and how long it takes to dry.bags, sand and drying time
- Concrete curing and strength calculatorFrom the pour date: when to walk on it, strip shutters, drive on it, remove props and lay tiles.dates and strength by day
