Get a quote
  • m³
  • Bags
  • Steel
  • Curing

Concrete Calculators for South Africa

Free calculators for planning concrete work: volume and trucks, cement, sand and stone, rib and block, mesh and rebar, footings, screed and curing dates, with the reference figures builders use most.

  • Calculators7
  • Unitsmetric, SA sizes
  • Cost to youfree

Pick a calculatorGet a free quote

A builder's tape measure, calculator and plans on a stack of cement bags at a slab pour
A builder's tape measure, calculator and plans on a stack of cement bags at a slab pour

Each calculator works in metres, millimetres and the sizes South African suppliers sell: 6 m³ trucks, 50 kg bags, 6 × 2.4 m mesh sheets and 6 m bars. The results update as you type, and you can send them with a free quote request.

Handy figures for concrete work

ItemFigure
1 cubic metre (m³)1,000 litres; a 1 m × 1 m × 1 m block
1 m³ of concreteabout 2.4 tonnes; 10 m² of slab at 100 mm
Ready-mix truckusually 6 m³; some carry 8–9 m³
Bag of cement50 kg, about 33 litres
Builder's wheelbarrowabout 65 litres, filled level
Cube of building sand (dry)about 1.6 tonnes
Cube of 19 mm stoneabout 1.45 tonnes
Mesh sheet6 m × 2.4 m (14.4 m²); Ref 193 about 44 kg
Rebar massdiameter² ÷ 162 kg per metre; Y12 is 0.888 kg/m
StrengthMPa at 28 days, e.g. 25 MPa for a house floor

Which strength for which job

StrengthTypical use
10–15 MPaBlinding under footings, garden paths, fence post holes
20 MPaHouse strip footings, light slabs, tank stands
25 MPaHouse floors (surface beds), driveways, carports
30 MPaGarage floors, heavier driveways, rib-and-block toppings, suspended slabs
35–40 MPaIndustrial floors and structural work, as the engineer specifies

Exposure matters too: near the coast and in wet areas, a higher strength and good cover to the steel help concrete last. The slab calculator page has typical thicknesses for common jobs.

From the numbers to a price

The calculators tell you how much; the price depends on the strength class, the delivery distance, access for the truck or a pump, the labour and the season. Every calculator has a button that copies your figures into the quote form, so contractors and suppliers price exactly what you worked out. Read the guides to concrete slabs, ready-mix concrete and concrete contractors for what affects the cost.

Frequently asked questions

Are the calculators free?
Yes. They run in your browser, nothing is stored, and you don't need to sign up. If you want prices, send the figures with the free quote form and contractors or suppliers in your area will quote you.
How accurate are the concrete calculators?
The volumes are exact for the sizes you enter; real jobs need 5 to 10% extra for uneven ground and waste. Mix quantities, rib-and-block counts and curing dates are typical figures for planning and comparing quotes. Approved plans, an engineer's design and the supplier's instructions always come first.
How much does a ready-mix truck carry?
Most ready-mix trucks in South Africa carry about 6 m³. Some suppliers have larger 8 to 9 m³ trucks and small trucks for part loads, which usually cost extra per cubic metre.
How heavy is a cubic metre of concrete?
About 2.4 tonnes. A cube of dry building sand weighs about 1.6 tonnes and a cube of 19 mm stone about 1.45 tonnes.

Concrete services and supplies

Get a free concrete quote

Tell us what you need and where. A contractor or supplier who works in your area quotes you directly. Free, no obligation.

Pour docketPD 381682

Pour calculator (optional)

Length and width in metres, thickness in millimetres. Add a row for each slab, footing or path. The totals go into your request.

#Length mWidth mThick mmQty
1×××
2×××
3×××
0m² area
0m³ concrete
06 m³ trucks

Order about 5–10% more than the net volume to allow for waste and uneven ground.

Strength, if you know it
Tick what applies (optional)

Free and no obligation. By sending you agree that we may share your request with a suitable contractor or supplier. See our privacy policy.

Get a free quote